交流电流钳表 DCL-10

交流电流钳表DCL-100.01-60-100A交流量程带背光的ACA专用微型钳便于狭窄处使用的钳型细磁芯夹紧状态确认标记 

交流电流钳表DCL-10

便于狭窄处使用的钳型细磁芯

夹紧状态确认标记

0.01-60-100A交流量程

带背光的ACA专用微型钳


数据锁定

自动关机(大约30分钟)

采样率: 数值 2次/秒

Designed as a small, easy-to-carry device that can be put in your pocket !
The full-auto range has been adopted to eliminate the need of selecting a range !

Slim jaws with width of approximately 9 mm are used to enable the user to easily clamp the conductive wire under measurement among densely routed conductive wires.

■ Back light has been adopted to use in the dark place.

■ A leverbuttons are laid out in positions where they can be handled with a single hand.

■ The use of a large data hold button with a good click feel enables the user to press the button even in an overhead or other location where the button is not viewable during measurementto check the measured value later.

■ The use of a portrait type LCD with a backlight provided in the lower part allows the user to read the displayed value while holding the meter.

■ Its rear has been curved so that the clamp meter can be held comfortably in the palm.