红光源 ADS-038
产品简介
红光源又名可视光故障检测仪,ADS-038可视红光源采用650nm激光器作为发光器件, 输出功率可达1mW,适用于单模或者多模光纤的测量,既可采用2节*常见的5号电池(AA电池)供电,也可采用5号充电电池供电(内部有升压电路),连续工作时间可达30小时以上。是您需要测试各种型号的光纤跳线、带状、束状尾纤, 以及施工现场或者光纤线路维护的理想工具。
产品详细信息
ADS-038手持式可视红光源采用650nm激光器作为发光器件,输出功率可达1mW,适用于单模或者多模光纤的测量。
ADS-038既可采用2节*常见的5号电池(AA电池)供电,也可采用5号充电电池供电(内部有升压电路),连续工作时间可达30小时以上。
ADS-038另有低压告警功能(LED直观显示)
ADS-038手持式红光源使用FC型适配器作为主要输出接口,也可以使用简便的“速接”接口,适合于所有2.5mm光纤接头。是您需要测试各种型号的光纤跳线,带状,束状尾纤, 以及施工现场或者光纤线路维护的理想工具。
产品特性:
-恒功率输出,性能稳定,寿命长
-采用光纤输出,入纤功率高
-可选用5号充电电池供电,环保节能
-有低电压检测告警指示功能
-2.5mm 通用适配器
-支持直流和调制工作模式
-光纤中传输距离达8公里
-轻易识别光纤断点,弯曲,可以通过有保护层的光纤
-实现端到端光纤识别
-完成机械接续点的检测与优化
-卡通造型面板,美观大方
技术指标
仪表型号 | ADS-038 |
输出功率 | 1mW |
波长 | 650nm |
谱宽(20℃) | <5nm |
适用光纤 | SM、MM |
输出方式 | 直流或调制(调制频率2Hz) |
连接器 | 2.5mm通用型适配接口 |
电池连续工作时间 | ≥30小时 |
电源 | 2节AA碱性电池 或 2节AA充电电池 |
工作温度(℃) | -10~+45 |
存储温度(℃) | -25~+65 |
尺寸(mm) | 135×70×24(长×宽×厚) |
重量(g) | 250(含电池) |
标准配置:
可视红光源一台,使用说明书一份,5号电池两节(电池限江浙江沪地区)
注意事项:
1) 激光有害,尤其要注意保护眼睛,激光器工作时,禁止照射眼睛
2) 一般情况下,温度越高,激光器的寿命越短
3) 激光器工作时,被测光纤端面应清洁干净
4) 长期使用后,红光笔输出端口可能粘有污垢,造成输出功率下降,这时用户可用沾上无水酒精的棉签**污垢,再用干棉签去除痕迹
5) 不使用本激光光源时,请将防尘帽戴好以避免灰尘污染
6) 长期不使用时,请将电池取出
7) 本产品电源推荐使用5号镍氢充电电池,也可使用两节标准5号AA碱性电池供电
8) 请将废弃的一次性电池放入指定点回收,注意环境保护。
关键词:红光源,可视激光光源,可视故障检测仪,手持式红光源,光纤红光笔,可视激光器
原产地:上海
供货周期:现货供应
Description:
With a 650nm visible fiber diode, Visual Fault Locator ADS-038 can be operated in either continuous-wave (CW) mode or pulse mode.
ADS-038 Visual Fault Locator is used for the measurement in single-mode or multi-mode fibers. The ADS-038 visual fault locator easily identifies the cutting, micro-bending of the optic fiber, passes through the jacket fiber and performs an end-to-end fiber identification. Its measurement range is up to 8km. It is an ideal tool for the examination of all kinds of patch cords and ribbon or bunched pigtails in the installation and maintenance of fiber optic networks.
Specification
Type | ADS-038 |
Output Power | 1mW |
Wavelength | 650 |
Spectral Width(20℃) | <5nm |
Fiber Model | SM、MM |
Connector | 2.5mm universal adapter |
Power | AA Rechargeable or AA alkaline battery |
Battery Operating Time | 30 hours |
Operating Temperature(℃) | -10~+45 |
Storage Temperature(℃) | -25~+70 |
Dimension (without connector)(mm) | 135*70*24 (L*W*D) |
Unit Weight(g) | 250 |
Features:
Compact size and light weight, suitable for field testing
End-to-end visual fiber identification with high power
2.5mm universal adapter
AA Rechargeable battery can be option
Low-battery detectory & indication
Locates fault up to 8km in fiber
Can easily detects breaks, micro-bends