When ordering our products, specify them with an “Ordering Code”.
The above specifications are standard for this NDK product. If you require a product with specifications not given above, please contact NDK sales. |
|
- Frequency setting conditions
-
- Frequencies are set at normal temperatures(+25°C±2°C).
- Frequencies are set with a printed board that has a ground pattern attached to the underside of an oscillator.
- If you require a product with a different frequency, power supply voltage, frequency control characteristic, etc. to the standard specifications, please contact us with your enquiries.
|
*1 : A DC-cut capacitor is not embedded in this crystal oscillator. Connect a DC-cut capacitor (1,000 pF) to the line-out terminal of the oscillator.
|
*2 : This is a representative specification. The specifications may change according to the frequency that you request. |