C9脚踏式自动出锡焊台 C9
产品简介
C9脚踏式自动出锡焊台 欧泰克C9自动出锡无铅焊台 自动破锡焊台 自动送锡焊台 四川自动出锡焊台 成都自动出锡焊台
产品详细信息
C9脚踏式自动出锡焊台
C9型脚踏式自动送锡焊台/自动出锡焊台
1.大屏幕显示温度、工作界面,操作界面。
2. 把烙铁头安装(固定)在设备上,通过机械送锡丝至烙铁头尖部(无需一手拿锡丝,一手拿烙铁手柄),这样作业员可以空出两只手,然后用来握住需要焊锡的工件;
3.“脚踏开关”控制送丝;
4. 两种控制送丝方式:1、自动送丝:开关一次,固定送丝长度,循环工作; 2、人工控制送丝:压住开关送丝,松开开关送丝停止;
5. 送丝长度任意设置(自动模式下通过设置送丝时间实现);
6. 送丝速度任意设置,根据需要可快可慢;
7. 进丝位置可以旋转到烙铁头360度的任意角度;
8. 机头(烙铁头角度)高矮可调;
9. 焊锡防爆功能:在锡丝上进行打孔,可以减少焊锡时的飞溅(注:送锡管根据锡丝选配);
10. “焊锡大师”牌送锡焊台送锡准、升温快,受到广大用户好评。
适用范围
此类产品适合于焊接:DB头、cable、USB、通讯连接器与电线电缆的焊接。
安装方式
一、一体安装方式:将机头和控制器安装在一起(此类安装时出厂标准安装方式)。
二、分体安装方式:机头安装在工作台面上,将控制器安装在其它合适的位置。
输入电压:AC220V/110V
输出电压:AC24V
电子发热芯功率:80W
温度范围:150℃―500℃
空载温差:±2℃
焊锡咀与接地电阻:≤2Ω
焊锡咀漏电压:≤2mV
可选用焊锡咀:Q1系列(参考烙铁头分类)
密码设置范围:001―999(000无密码)
休眠温度范围:50℃―≤设置温度
休眠时间范围:1―60min
人工校温范围:-99℃―99℃
Product description
1) The new design concept
Upgrade version of send solder soldering stations, send solder construct, heating element and solder tip and solder tube installation are all new design concept.
Fixed the soldering tip on the machine, it can feed solder to the head of soldering tip automatically (no need one hand with solder, another hand hold solder handle),so this permit operator hold the solder equipment with two hands.
2) avoid Soldering explode function
C9 automatic feed soldering station punch hole on the solder can eliminate solder wire generated gas when melting, reduce the soldering splash (different solder match with different solder tube);
3) flexible, scientific working principle
Soldering tube and solder tip precision combined with an organic whole won’t shift.
Can also separate install the controller and soldering tip, send solder construct, effective save operation space;
feeding solder position can be rotating 360 °around solder tip, rotate to soldering tip of arbitrary Angle;
Solder tip, solder wire tube Angle, height arbitrary adjustable, suitable for the different height operators application.
4) Two ways of solder feeding
1.Auto solder feeding: open the switch, fixed solder wire length, cycle operation
2.Manual solder feeding: press the switch to feeder solder, loose switch to stop solder feeding
3.Freely set solder feeding length (under AUTO model, achieved by setting solder feeding time)
4.Freely set solder feeding speed, quick or slow per requirement
Technical parameters
model | C9 | |
Input voltage | AC220V/110V | |
Output voltage | AC24V | |
Heater power | 80W | |
Temperature rangge | 150℃~450℃ | |
no-load temperature difference | ±2℃ | |
The tips and grounding resistance: | ≤2Ω | |
soldering tip leakage voltage | ≤2mV | |
Soldering tip type | X1 series | |
Password setting range | 001~999(000 no password) | |
Sleeping temp. range | 50℃~≤ setting temp. | |
Sleeping time set range | 1~60min | |
Manual adjust temperature range | -99℃~99℃ | |
Soder Dia (selective) | 0.5/0.6/0.8/1.0/1.2/1.5/1.6mm
(Different solder wire match different solder tube) |
|
Application range |
Soldering application range: B head, cable,USB,Communication connector and electric wire. |
C9 structure diagram
1) soldering tip height can be adjustment;
2) solder wire tube angle can be rotate around 360 degree
Segregate install method
C9 configuration introduction
Automatic soldering station host
Footswitch
Power line
Clean sponge
Solder anti-splash function: Eliminate high temperature splash and improve soldering quality